Package "linux-qcom"

  linux-qcom (6.8.0-1064.65) noble; urgency=medium

  * noble/linux-qcom: 6.8.0-1064.65 -proposed tracker (LP: #2141285)

  * [x08][5430] Cannot detect audio sink and source
    - QCLINUX: arm64: dts: qcom: qcs6490-addon-rb3gen2: Move pinctrl handling
      to the msm-stub codec

  * [rb8] SRU the qupv3fw.elf
    - [Packaging] add dependency on linux-
      firmware>=20240318.git3b128b60-0ubuntu2.22

 -- Masahiro Yamada <email address hidden> Mon, 09 Feb 2026 17:53:36 +0900

  linux-qcom (6.8.0-1057.58) noble; urgency=medium

  * noble/linux-qcom: 6.8.0-1057.58 -proposed tracker (LP: #2132319)

  * [QC] Can we use adreno firmwares from linux-firmware
    - kgsl: a6x: Use secure firmware with mbn format
    - arm64: dts: qcom: Add firmware-name property for Adreno GPUs
    - kgsl: Add support to check /lib/firmware/qcom for sqe and gmu firmwares

  * [RB3] Suspend resume not working on X04
    - PENDING: drivers: pinctrl: skip storing/restoring reserved GPIOs
    - QCLINUX: Revert "QCLINUX: dcc: Add suspend to RAM support for qcom-dcc
      driver"
    - QCLINUX: pci: misc: qps615: Remove request_firmware() dependency on
      resume
    - PENDING: arm64: dts: qcom: Remove CLKREF_EN from PCIe1 clocks node

  * change the qupv3fw.elf path temporarily
    - SAUCE: change the qupv3fw.elf loading path
    - Revert "UBUNTU: SAUCE: i2c: qcom-geni: Change the firmware folder for
      QLI1.6"

  * [RB3] [QLI1.6] the monitor shows a black screen with desktop-image
    - SAUCE: drm: msm: skip dpu_find_format if catalog is not ready

  * RB4 Audio BU with TPLG support
    - SAUCE: dts: qcom: RB4: support tplg for pro-sku board

  * camera UAPI compatibility update
    - msm: camera: uapi: new structure for SAT frame sync
    - msm: camera: reqmgr: adding support sched_req ver3

  * Monza BT Support
    - PENDING: arm64: dts: Enable BT_EN pin via GPIO55 on Monza
    - Bluetooth: btusb: QCA: Fix downloading wrong NVM for WCN6855 GF variant
      without board ID
    - PENDING: driver: bluetooth: btusb: add default nvm file
    - BACKPORT: Bluetooth: btusb: QCA: Support downloading custom-made
      firmwares
    - PENDING: driver: bluetooth: btusb: add custom-made firmwares

  * Monza Display support (eDP)
    - PENDING: ARM: dts: msm: monza: enable DisplayPort

  * Monza Camera Support
    - ARM: dts: msm: Camera: Add dtsi for monaco-monza dev

  * Monza eMMC Support
    - PENDING: arm64: dts: qcom: Add eMMC support for monza EVK board

  * Monza enable PCIE0
    - PENDING: arm64: dts: qcom: Add PCIe support for monza EVK board

  * Monza WLAN Support
    - PENDING: arm64: dts: qcom: Set GPIO54 high for WiFi rfkill on Monza EVK

  * Monza USB2.0 and Type-A ports
    - PENDING: arm64: dts: qcom: Enable USB2 controller on monza EVK board

  * Monza USB3.0 - SS and HS
    - PENDING: arm64: dts: qcom: Enable primary USB for monza EVK board

  * Monza Ethernet Support
    - PENDING: arm64: dts: qcom: Enable ethernet on monza EVK board

  * Monza kernel (includes DT) update
    - PENDING: arm64: dts: qcom: add support for monza board
    - QCLINUX: arm64: dts: qcom: addons DT support for monaco monza

  * [RB8][x05] dwc3-qcom errors found in dmesg
    - Revert "UBUNTU: SAUCE: arm64: dts: qcom: fix vbus_dwc3 issue for
      qcs9075"
    - Revert "usb: dwc3: qcom: Add DT property check before regulator get"
    - PENDING: usb: dwc3: qcom: Handle optional vbus_dwc3 regulator without
      error logging

  * (kernel-space) high resolution (4K) improvement - Integrate HDMI bridge
    lontium-lt9611 driver
    - drm/bridge: lt9611: Avoid partial display failure
    - arm64: dts: rubikpi3: enable lt,fixed-mode attribute for HDMI function

  * The msm display driver not updated in the kernel
    - SAUCE: sync msm_default from msm for -1057
    - SAUCE: Do the necessary change to support adreno for -1057

  * [RB8] the 2.5Gbs ethernet port is limited to 1Gbs
    - net: phy: move at803x PHY driver to dedicated directory
    - net: phy: qcom: create and move functions to shared library
    - net: phy: qcom: deatch qca83xx PHY driver from at803x
    - net: phy: qcom: move additional functions to shared library
    - net: phy: qcom: detach qca808x PHY driver from at803x
    - net: phy: qcom: qca808x: fix logic error in LED brightness set
    - net: phy: qcom: qca808x: default to LED active High if not set
    - net: phy: qcom: move more function to shared library
    - net: phy: qcom: move common qca808x LED define to shared header
    - net: phy: qcom: generalize some qca808x LED functions
    - net: phy: qcom: qca808x: add helper for checking for 1G only model
    - net: phy: qcom: qca808x: fill in possible_interfaces
    - net: phy: qcom: qca808x: Fix WoL issue by utilizing at8031_set_wol()
    - net: phy: qcom: move the WoL function to shared library
    - PENDING: net: phy: qcom: qca808x: Add .get_rate_matching support
    - Ubuntu: [Config] run updateconfigs after merging AT80xx PHY driver
    - SAUCE: arm64: dts: qcom: qcs9075-iq-9075-evk: ethphy to 2.5G

  * Miscellaneous Ubuntu changes
    - SAUCE: qcom: dts: add monaco monza board to combined-dtb
    - SAUCE: i2c: qcom-geni: Change the firmware folder for QLI1.6
    - SAUCE: arm64: dts: qcom: fix usb_dwc3 calltrace for rb4
    - SAUCE: add camera driver build for rb4
    - SAUCE: qcom: dts: Makefile: add video and graphic for rb4

  * Miscellaneous upstream changes
    - PENDING: dt-bindings: arm: qcom: Add QCM6490 RB3 board
    - QCLINUX: dt-bindings: arm: qcom: Add QCM6490 addons support
    - QCLINUX: dt-bindings: arm: Add mezz board support on QCM6490
    - PENDING: dt-bindings: arm: qcom: Add rb3gen2 mezzanine board support on
      QCM6490
    - QCLINUX: dt-bindings: arm: qcom: Add X1E80100 addons support
    - FROMLIST: dt-bindings: arm: qcom: Document QCM8550, QCS8550 SoC and
      board
    - QCLINUX: dt-bindings: arm: qcom: Add QCS8550 addons support
    - PENDING: dt-bindings: arm: qcom: Document rb5gen2-hdk board
    - QCLINUX: dt-bindings: arm: qcom: Update qcm6490-rb3 to qcs6490-rb3gen2
    - PENDING: dt-bindings: arm: qcom: Update rb5gen2-hdk to rb5gen2
    - QCLINUX: dt-bindings: arm: qcom: Add QCS5430 Soc and Boards
    - dt-bindings: arm: qcom: add missing SDM845 board compatibles
    - dt-bindings: arm: qcom: add missing SM6125 board compatibles
    - dt-bindings: arm: qcom: add missing SM6350 board compatibles
    - dt-bindings: arm: qcom: Document lg,judyln and lg,judyp devices
    - dt-bindings: arm: qcom:

  linux-qcom (6.8.0-1056.57) noble; urgency=medium

  * noble/linux-qcom: 6.8.0-1056.57 -proposed tracker (LP: #2129199)

  * [RB8][x05] dwc3-qcom errors found in dmesg
    - SAUCE: arm64: dts: qcom: fix vbus_dwc3 issue for qcs9075

 -- Hui Wang <email address hidden> Tue, 21 Oct 2025 22:28:37 +0800

  linux-qcom (6.8.0-1055.55) noble; urgency=medium

  * noble/linux-qcom: 6.8.0-1055.55 -proposed tracker (LP: #2123917)

  * Bringing up RPI IMX577 in RB4
    - ARM: dts: msm: Camera: Add dtsi for RB4 4xPMIC dev
    - ARM: msm: dts: camera: Add support for RPi imx577 sensor
    - SAUCE: dts: qcom: add 2 qcs8275 platforms in the makefile

  * [RB8] 0004-QCLINUX-net-stmmac-Add-EEPROM-support-to-driver.patch feedback
    - Revert "QCLINUX: net: stmmac: Add EEPROM support to driver"

  * [RB8] FAN inverted PWN handling
    - hwmon: (amc6821) Add PWM polarity configuration with OF
    - SAUCE: dts: qcom: add pwm polarity for fan

  * [QC] Using mbn instead of mdt
    - arm64: dts: qcom: switch from .mdt to .mbn firmwares

  * RB4 Audio BU with TPLG support
    - RB4: support tplg based soundcard

  * Miscellaneous upstream changes
    - arm64: dts: rubikpi: add RUBIK Pi related basic device tree
    - arm64: dts: rubikpi: compatible with USB-A 2.0 port
    - arm64: dts: rubikpi: enable USB3.0 HUB
    - arm64: dts: rubikpi: enable M.2 port
    - net: ax88179b: add driver
    - arm64: dts: rubikpi: enable fan
    - arm64: defconfig: enable ax88179b config
    - wifi: ap6256: add driver
    - arm64: dts: rubikpi: enable Wi-Fi
    - arm64: dts: rubikpi3: enable bluetooth
    - serial: qcom-geni: increase uart ports to 13
    - arm64: dts: rubikpi: enable rtc to support time writing
    - arm64: dts: rubikpi: camera: bringup imx219 and imx477
    - drm/bridge: lt9611: rubikpi: enable hdmi out
    - arm64: dts: rubikpi3: enable hdmi out interface
    - ASoC: es8316: rubikpi: enable 3.5mm headphone jack
    - arm64: dts: rubikpi3: enable 3.5mm headphone jack
    - spi: spidev: add an entry for thundercomm,rubikpi
    - arm64: dts: rubikpi: enable bus interface on 40 pin
    - ASoC: qcom: qcm6490: rubikpi: enable HDMI OUT audio
    - arm64: dts: rubikpi3: enable HDMI OUT audio
    - arm64: dts: rubikpi3: Enable Bluetooth kernel driver
    - drm/bridge: lt9611: rubikpi: fix the problem of hot plug failure
    - arm64: dts: rubikpi3: modify the interrupt trigger mode of HDMI out
    - arm64: dts: rubikpi: camera: Remove unnecessary gpio controls
    - Ubuntu: [Config] update CONFIG options for Rubik Pi 3
    - drm/bridge: lt9611: rubikpi: fix some HDMI monitors cannot display
    - arm64: dts: rubikpi3: added min-vblank configuration for hdmi function
    - HID: multitouch: Add support for QinHeng Electronics USB2IIC_CTP_CONTROL
    - soc: qcom: pmic_glink: resolve compilation errors
    - arm64: dts: rubikpi3: Increase temperature trigger point
    - arm64: dts: rubikpi3: Enable USB Type-C display
    - arm64: dts: rubikpi3: change device tree name
    - arm64: dts: rubikpi3: set the Bluetooth serial port baud rate to 3Mbps
    - arm64: dts: rubikpi3: remove pm7325b
    - ASoC: qcom: qdsp6: q6apm: add S32_LE format support for hw playback
    - ASoC: qcom: qcm6490: roll back qcm6490.c to its original state
    - ASoC: qcom: qcm6490: rubikpi: add support for RubikPi3 board
    - ASoC: codecs: es8316: enable MCLK
    - arm64: dts: rubikpi3: modify dtsi to enable kernel ALSA PCM
    - arm64: dts: rubikpi3: switch the USB2.0 Type-A port to OTG mode
    - ASoC: codecs: es8316: roll back the es8316 driver to its original state
    - ASoC: codecs: es8316: modify the es8316 driver to adapt to RubikPi3
    - arm64: dts: rubikpi3: modify the es8316 power supply pin
    - wifi: ap6256: disable configuration file hash detection
    - drm/bridge: lt9611: roll back the lt9611 driver to its original state
    - drm/bridge: lt9611: modify the lt9611 driver to adapt to RubikPi3
    - arm64: dts: rubikpi3: adjust the register configuration of LT9611
    - Ubuntu: [Config] Disable bcmdhd wifi driver

 -- Hui Wang <email address hidden> Tue, 16 Sep 2025 19:54:50 +0800

  linux-qcom (6.8.0-1054.54) noble; urgency=medium

  * noble/linux-qcom: 6.8.0-1054.54 -proposed tracker (LP: #2122312)

  * [RB8][x03] bam-dma-engine errors found in dmesg (LP: #2109950)
    - PENDING: arm64: dts: qcom: Add num-channels and num-ees for bam-dma

  * [qcom] Fix bug regarding DT qcom,phy-rst-gpio property (LP: #2120806)
    - QCLINUX: data-eth: qps615: Add fallback for PHY reset GPIO using
      alternate property

  * [qcom] real solution for thermal_sys failed to bind errors
    - QCLINUX: arm64: dts: qcom: Update cooling cell for cdsp node for qcm6490
    - QCLINUX: arm64: dts: qcom: Update cooling cell for msm_gpu node for
      qcm6490

  * camera-UAPI headers not packed as part of dev package
    - [Packaging] add usr/include/camera_kt/*.h files to linux-libc-dev-qcom

  * [RB8][x04] USB storage via type-c port not detected on second plug-in
    - Revert "usb: xhci: Implement xhci_handshake_check_state() helper"

 -- Hui Wang <email address hidden> Mon, 08 Sep 2025 18:21:17 +0800