Package "linux-xilinx-tools-common"

  linux-xilinx (6.8.0-1015.16) noble; urgency=medium

  * noble/linux-xilinx: 6.8.0-1015.16 -proposed tracker (LP: #2107436)

  * Packaging resync (LP: #1786013)
    - [Packaging] debian.xilinx/dkms-versions -- update from kernel-versions
      (main/d2025.04.16)

  * log observed-watchdog: Delayed init of the lockup detector failed: -19 with
    Ubuntu 24.04 kv/kr/kd (LP: #2106795)
    - watchdog: handle the ENODEV failure case of lockup_detector_delay_init()
      separately

  * [KV260 Rev1][KV260 Rev2][KR260][KD240] stress-ng af-alg causes system hang
    (LP: #2106790)
    - crypto: xilinx: Change DMA address size to 64 bit for Versal
    - crypto: zynqmp-sha: Change algo from shash to ahash algo
    - crypto: zynqmp-sha: Add crypto engine support
    - crypto: zynqmp-sha: Set state size based on fallback hash

 -- Kuan-Ying Lee <email address hidden> Wed, 16 Apr 2025 11:28:00 +0800

  linux-xilinx (6.8.0-1014.15) noble; urgency=medium

  * noble/linux-xilinx: 6.8.0-1014.15 -proposed tracker (LP: #2103893)

  * Enable CONFIG_FPGA_MGR_VERSAL_FPGA (LP: #2103891)
    - [Config] Enable CONFIG_FPGA_MGR_VERSAL_FPGA

 -- Wei-Lin Chang <email address hidden> Sun, 23 Mar 2025 16:09:46 +0800

  linux-xilinx (6.8.0-1013.14) noble; urgency=medium

  * noble/linux-xilinx: 6.8.0-1013.14 -proposed tracker (LP: #2100666)

  * crypto: Kconfig: Resolve Xilinx RSA driver conflict (LP: #2100664)
    - crypto: Kconfig: Obsolete DEV_XILINX_RSA config option
    - crypto: Kconfig: Allow to select only one Xilinx RSA driver
    - [Config] Set CONFIG_CRYPTO_DEV_XILINX_RSA as '-'

 -- Wei-Lin Chang <email address hidden> Sun, 02 Mar 2025 15:40:27 +0800

  linux-xilinx (6.8.0-1012.13) noble; urgency=medium

  * noble/linux-xilinx: 6.8.0-1012.13 -proposed tracker (LP: #2094997)

  * linux-xilinx: add dwarfdump package in the Build-Depends (LP: #2095556)
    - [Packaging] Add dwarfdump package in the Build-Depends

  * Disable CONFIG_USB_USB5744 (LP: #2095558)
    - [Config] Set CONFIG_USB_USB5744 as 'n'

 -- Kuan-Ying Lee <email address hidden> Thu, 23 Jan 2025 14:29:46 +0800

  linux-xilinx (6.8.0-1011.12) noble; urgency=medium

  * noble/linux-xilinx: 6.8.0-1011.12 -proposed tracker (LP: #2092705)

  * Rebase to Xilinx 2024.2 Kernel (LP: #2092435)
    - SAUCE: Revert "net: phylink: remove a bunch of unused validation methods"
    - SAUCE: Revert "net: phylink: remove .validate() method"
    - [Config] Set CONFIG_VERSAL_THERMAL as 'n'
    - [Config] Set CONFIG_COMMON_CLK_IDT8T49N24X as 'n'
    - [Config] Set CONFIG_SCSI_UFS_AMD_VERSAL2 as 'm'
    - [Config] Set CONFIG_USB_ONBOARD_DEV as 'y'
    - [Config] Set CONFIG_VIDEO_XILINX_HDCP2X_RX as 'y'
    - [Config] Correct annotation flavour name

  * Miscellaneous upstream changes
    - remoteproc: Make rproc_get_by_phandle() work for clusters
    - spi: spi-xilinx: fix race condition in xilinx_spi_irq()
    - mtd: spi-nor: issi: Add support for is25lp01gg Quad flash
    - dt-bindings: xilinx: Add WWDT clock IDs for Versal NET
    - dts: xilinx: update clock IDs for Versal NET WWDT nodes
    - arm64: versal: Remove clk_ignore_unused flag from DTs
    - Revert "usb: dwc3: Correct usb dma mask for making SMMU work in device mode"
    - mtd: spi-nor: Add DDR support for Gigadevice OSPI flashes
    - dt-bindings: can: xilinx_can: Modify the title to indicate CAN and CANFD
      controllers are supported
    - can: xilinx_can: Document driver description to list all supported IPs
    - arm64: configs: Remove deprecated GPIO sysfs configuration
    - arm64: versal-net: rename VN-X-b2197-00-revA dts to VN-X-b2197-01-revA
    - arm64: versal-net: add support for VNX board peripherals
    - firmware: xilinx: Remove unused variable api_id
    - crypto: xilinx: Remove unused pointers
    - nvmem: xlnx_secure: Support for programming AES keys
    - nvmem: xlnx_secure: Fix for the size of PUF data from linux
    - dt-bindings: net: xlnx,axi-ethernet: Add "xlnx,runtime-switch" DT property
      for 1G/10G/25G ethernet IP
    - net: axienet: Phylink support for 1G/10G/25G ethernet IP
    - remoteproc: zynqmp_r5: In prepare set var 'ret' to 0 at start of function
    - spi: spi-cadence: Enable spi refclk in slave mode
    - misc: xaiengine: copy aperture node to temporary list
    - spi: cadence-quadspi: Add quirk to skip STIG mode for data xfers
    - OF: overlay: Skip overlay_removal_is_ok check for PL use cases
    - arm64: versal: Sync address/size cells with binding
    - arm64: versal: Fix ospi compatible strings
    - arm64: versal: Use fpga-region instead of fpga to match dt-schema
    - dt-bindings: iio: xilinx: Add missing additionalProperties for supply nodes
    - dt-bindings: thermal: versal: Add document for Versal Thermal
    - iio: adc: versal-sysmon: Add iio map to thermal
    - thermal: versal-thermal: Add Versal thermal driver
    - arm64: versal: add thermal sensor and zone
    - dt-bindings: remoteproc: Add Tightly Coupled Memory (TCM) bindings
    - remoteproc: zynqmp: Add coredump support
    - remoteproc: zynqmp: fix lockstep mode memory region
    - remoteproc: zynqmp: parse TCM from device tree
    - drivers: remoteproc: xlnx: Add Versal and Versal-NET support
    - drivers: remoteproc: xlnx: Fix uninitialized variable use
    - drivers: remoteproc: xlnx: Fix uninitialized tcm mode
    - arm64: versal: Fix vek280 memory configuration
    - firmware: xilinx: add support for new SMC call format
    - arm64: dts: xilinx: remove remoteproc node
    - arm64: versal-net: Add thermal sensor and zone
    - arm64: versal-net: Align node names with dt-schema
    - arm: dts: versal: Fix ranges property to avoid overlapping of bridge
      register and 32-bit BAR addresses
    - dt-bindings: phy: v-hdmi-phy1: Add dt entries for Tx/Rx clock primitives
    - phy: xilinx-xhdmiphy: Add support for selection of PLL/MMCM clock primitive
    - v4l: xilinx: isppipeline: Fix comment around Red Gain
    - arm64: dts: zynqmp: zcu106a: Remove dpcon node
    - drivers: iio: adc: xilinx-ams: Add module description
    - firmware: xilinx: fix feature check logic for TF-A specific APIs
    - usb: dwc3: Export symbol dwc3_host_wakeup_register/capable
    - include: linux: firmware: correct versal-net sw error event masks
    - arm64: xilinx: Enable SMMU by default
    - usb: misc: usb5744: Increase post reset delay
    - dt-bindings: media: xilinx: Add documentation for ISP-2.0
    - v4l: xilinx: isppipeline: Add compatible string for v2.0
    - v4l: xilinx: isppipeline: Add support for AEC
    - v4l: xilinx: isppipeline: Add support for BLC
    - v4l: xilinx: isppipeline: Add support for AWB
    - v4l: xilinx: isppipeline: Add support for BPC
    - v4l: xilinx: isppipeline: Add support for DEGAMMA
    - v4l: xilinx: isppipeline: Add support for RGBIR
    - v4l: xilinx: isppipeline: Add support for LSC
    - v4l: xilinx: isppipeline: Add support for DEMOSAIC
    - v4l: xilinx: isppipeline: Add support for CCM
    - v4l: xilinx: isppipeline: Add support for Gain Control
    - v4l: xilinx: isppipeline: Add support for GAMMA CORRECTION
    - v4l: xilinx: isppipeline: Add support for HDR
    - v4l: xilinx: isppipeline: Add support for Tone mapping
    - v4l: xilinx: isppipeline: Add support for 3DLUT
    - v4l: xilinx: isppipeline: Add support for CSC
    - v4l: xilinx: isppipeline: Add support for BAYER STATS
    - v4l: xilinx: isppipeline: Add support for LUMA STATS
    - v4l: xilinx: isppipeline: Add support for RGB STATS
    - v4l: xilinx: isppipeline: Add support for CLAHE
    - v4l: xilinx: isppipeline: Add support for MEDIAN
    - v4l: xilinx: isppipeline: Add support for RESIZE
    - v4l: xilinx: isppipeline: Add support for ISP-ENABLE and restructure
      xisp_dev to resolve pahole issues
    - Revert "Revert "clk: Add ccf driver for IDT 8T49N24x UFT""
    - arm64: versal-net: Enable sysmon for VN-P-B2197 revA board
    - ASoC: xilinx: Add missing module descriptions
    - drm: xlnx: Fix DRM_XLNX_HDCP configuration
    - mailbox: zynqmp-ipi: Make polling period configurable
    - clk: idt: Fix incompatible function pointer t